The Spitfire Simulator Turn and Slip Gauge is a beautiful replica of the Turn and Slip Gauge. It has a vintage look and a slip range from 0 to 20 degrees and a turn range of 0 t0 4 degrees.
The needle movement is very smooth due to the use of stepper motors.
Physical characteristics:
height 120 mm
width 120 mm
depth 40 mm
weight 100 gr
mounting 4 screws
Power requirements:
power from Aces mini stepper module
Connection
2 X 4 pin connector flat cable (4 wires flat cable) supplied, requires 2 free ports on Aces Mini Stepper Module.
You will need the Aces Mini Stepper Module plus the Aces software to connect the gauge to the computer.
This Gauge is not to be used in any real aircraft it is for simulator use only.
