The B17 Simulator Climb and Descend Gauge is a beautiful replica of the B17 Climb and Descend Gauge. It has a vintage look and a range from -6000 to 0 to +6000 Feet.
The needle movement is very smooth due to the use of stepper motors.
Physical characteristics:
height 104 mm
width 104 mm
depth 40 mm
weight 110 gr
mounting 4 screws
Power requirements:
power from Aces mini stepper module
Connection
4 pin connector flat cable (4 wires flat cable) requires 1 free ports on Aces Mini Stepper Module.
You will need the Aces Mini Stepper Module to connect the gauge to the computer.
This Gauge is not to be used in any real aircraft it is for simulator use only.
