The B17 Simulator Flap Gauge is a beautiful replica of the B17 Flap Gauge. It has a vintage look and has movement range of UP and DOWN positions.
The needle movements are very smooth due to the use of stepper motors. The gauge is completely assembled and tested and gives smooth indications thanks to stepper motor technology.
Physical characteristics:
height 82 mm
width 82 mm
depth 40 mm
weight 55 gr
mounting 4 screws
Power requirements:
power from Aces mini stepper module
Connection
1 X 4 pin connector flat cable (4 wire flat cable) requires 1 free port on Aces Mini Stepper Module.
You will need the Aces Mini Stepper Module plus the Aces software to connect the gauge to the computer.
This Gauge is not to be used in any real aircraft it is for simulator use only.
