The ME262 Simulator Altimeter Gauge (FL22320) is a beautiful replica of the Altimeter Gauge (FL22320). It has a vintage look and a range 0 – 10 km with working pressure adjustment on needle only. The needle movement is very smooth due to the use of stepper motors. The gauge is completely assembled and tested and gives smooth indications thanks to stepper motor technology.
Physical characteristics:
height 85 mm
width 85 mm
depth 94 mm
weight 120 grams
mounting 4 screws
Power requirements:
power from Aces Mini Stepper Module and Aces I/O module board.
Connection
1 X 4 pin connector flat cable (4 wire flat cable) and 1 X 6 pin connector flat cable(6 wire flat cable) supplied, requires 2 free ports on Aces Mini Stepper Module, 1 X encoder port on Aces I/O module board.
You will need the Aces Mini Stepper Module, Aces I/O module board plus the Aces software to connect the gauge to the computer. Our software also supports Pokeys Boards.
This Gauge is not to be used in any real aircraft it is for simulator use only.
