The me262 Simulator Fuel Pressure Gauge is a beautiful replica of the Fuel Pressure Gauge. It has a vintage look and a range from 0 to 160kg/cm2.
The needle movement is very smooth due to the use of stepper motors. The gauge is completely assembled and tested and gives smooth indications thanks to stepper motor technology.
Physical characteristics:
height 60 mm
width 60 mm
depth 40 mm
weight 63 gr
mounting 4 screws
Power requirements:
power from Aces mini stepper module
Connection
4 pin connector flat cable (4 wires flat cable) requires 1 free port on the Aces Mini Stepper Module.
You will need the Aces Mini Stepper Module plus the Aces software to connect the gauge to the computer.
This Gauge is not to be used in any real aircraft it is for simulator use only.
