The Altimeter Gauge Type 1 is a beautiful replica of the Altimeter Gauge. It has a vintage look and a range 0 – 100000 feet with working pressure adjustment.
The needle movement is very smooth due to the use of stepper motors.
Physical characteristics:
height 92 mm
width 92 mm
depth 115 mm
weight 400 grms
mounting 4 screws
Power requirements:
power from Aces stepper module and Pokeys board.
Connection
3 X 4 pin connector flat cables (4 wires flat cable) supplied, requires 3 free ports on Aces Stepper Module, 1 X port encoder port on Pokeys board.
You will need the Aces Mini Stepper Module plus the Aces software to connect the gauge to the computer.
This Gauge is not to be used in any real aircraft it is for simulator use only.
