Spitfire Simulator Elevator Trim Gauge

£110.00

The Spitfire Simulator Elevator Trim Gauge is a beautiful replica of the Elevator Trim Gauge. It has a vintage look and has Trim range of Nose Up to 0 and Nose Down attitude.
The needle movements are very smooth due to the use of stepper motors. The gauge is completely assembled and tested and gives smooth indications thanks to stepper motor technology.

SKU: SB100000187UK Category:

The Spitfire Simulator Elevator Trim Gauge is a beautiful replica of the Elevator Trim Gauge. It has a vintage look and has Trim range of Nose Up to 0 and Nose Down attitude.
The needle movements are very smooth due to the use of stepper motors. The gauge is completely assembled and tested and gives smooth indications thanks to stepper motor technology.

Physical characteristics:

height 70 mm
width 70 mm
depth 40 mm
weight 55 gr
mounting 4 screws

Power requirements:
power from Aces mini stepper module

Connection
1 X 4 pin connector flat cable (4 wire flat cable) requires 1 free ports on Aces Mini Stepper Module.

You will need the Aces Mini Stepper Module plus the Aces software to connect the gauge to the computer.

This Gauge is not to be used in any real aircraft it is for simulator use only.